ǴԹ >> Mechanical Equipment >> Torque Load Cell >>
   
 
LXT 910/912 - Miniature Torque Cell Overview
The models LXT 910 and LXT 912 Miniature Reaction Torque Transducers are engineered for minimum size and an impressive 0.1%
non-linearity. Four bonded strain gages are positioned on a special machined portion of the transducer to effectively measure even
slight torque motion. These models operate and are calibrated in both directions. A modular, stainless steel construction and no moving..Readmore..
 
 
LXT 920 - Torque/Thrust Load Cell Overview
The LXT 920 torque/thrust load cell is design to measure reaction torque moments as well as tension and compression loads, all in one
transducer. Temperature compensated and constructed of all aluminum, this torque/thrust sensor is able to achieve an impressive 0.2%
nonlinearity and yet provide 150% over-capacity. Excellent performance and high precision are achieved through two separate o ..Readmore..
 
 
LXT 930 - Reaction Torque Cell Overview
The models LXT 930 Reaction Torque transducers are designed for installation between test pieces such as motors, switches, axles or
shafts and their mounting plate. These models operate in both directions. Utilizing bonded strain gages and no moving parts, these
models are maintenance free. ..Readmore..
 
 
LXT 932 - Flange Torque Cell Overview
The models LXT 932 Reaction Torque transducers are designed for installation between test pieces such as motors, switches, axles or
shafts and their mounting plate. These models operate in both directions. Utilizing bonded strain gages and no moving parts, these
models are maintenance free. ..Readmore..
 
 
LXT 950 - Flange Torque Cell Overview
The LXT 950 is a slip ring rotating transducer which provides accurate measurements of bolt or nut wrenching torques. This transducer
is tightening and break-away torques can be measured. Calibration of mechanical torque wrenches may be performed with this
transducer. Standard Feature: Safe Overload 150% over Capacity ..Readmore..
 
 
LXT 952 - Reaction Torque Cell Overview
The LXT 952 is a reaction torque transducer for application where rotation is not required. This transducer is tightening and
break-away torques can be measured. Calibration of mechanical torque wrenches may be performed with this transducer. Standard
Feature: Safe Overload 150% over Capacity ..Readmore..
 
 
LXT 963 - Rotating Torque Load Cell Overview
The LXT963 is designed to measure rotating drive torque using a conventional shaft-to-shaft configuration. This design incorporates a
slip ring assembly which transmits excitation voltage to, and output signals from, the rotating sensor. If purchased with the DPI 2000,
a personality module may be purchased for quick interfacing to that meter. Available as optional features are speed, angle ..Readmore..
 
 
LXT 970 Series Rotating Torque Load Cell- Square Drives- Male/Female Overview
The LXT 970 torque transducer operates on the principle of magnetoelasticity. The sensors output signal is caused by a change in the
magnetic field created by an applied torque on the sensor's shaft. Non-contact detectors, in close proximity to the shaft, detect
changes in the magnetic field and provide an electrical signal proportional to the torque. The electronics in the sensor provide ..Readmore..
 
 
LXT 971 Series Rotating Torque Load Cell- Shaft to Shaft Overview
The LXT 971 torque transducer operates on the principle of magnetoelasticity. The sensors output signal is caused by a change in the
magnetic field created by an applied torque on the sensor's shaft. Non-contact detectors, in close proximity to the shaft, detect
changes in the magnetic field and provide an electrical signal proportional to the torque. The electronics in the sensor provide ..Readmore..
 
 
DTW 400 - Digital Torque Tester / Screwdriver Overview
DTW-400 features an integral/adjustable LCD display for convenient torque readings. The unit is designed for screw tightening torque
verification and measures in Peak, Real Time, and Peak Down measuring modes (selectable). The DTW-400 has an accuracy of ± 0.5%
F.S., ±1 LSD and has programmable setpoints that provide both an audible beep and green/red LED indicator for uniform ..Readmore..
 
 
DTW 750 - Digital Torque Wrench Overview
The DTW 750 is a light weight digital torque wrench with a swiveling wrench head. It has a working torque range up to 660.0 inlb.
Torque controlled wrenches can also be evaluated by comparative tests on a given fastener. Both breakaway and loosen tests can be
performed. The DTW is rugged enough to be used as a production tool. This tester has an accuracy of ±0.5%, ± 1 LSD. It ..Readmore..
 
 
DTW 150/200 - Digital Torque Wrench Overview
The DTW 150/200 is a light weight digital torque wrench with a swiveling wrench head. It has a working torque range up to 180 in.lb.
Torque controlled wrenches can also be evaluated by comparative tests on a given fastener. Both breakaway and loosen tests can be
performed. Rugged enough to be used as a production tool. The DTW 150 has a 1/4 drive and the DTW 200 has a 3/8 drive. Standar ..Readmore..
 
 
MGT - Digital Torque Gage Overview
The MGT digital force torque gage is a miniature instrument offering a unique combination of ruggedness, small size and versatility.
The MGT offers an automatic peak memory with recall for clockwise and counter clockwise torque. This unique instrument offers
push-button calibration with battery or AC operation. The battery provides 30 hours of continuous operation. Standard
Feature: ..Readmore..
 
 
LXT I8 Overview
The LXT I series digital torque tester is ideal for calibrating power screwdrivers with torque control. It features peak mode to
capture the peak torque achieved during a test, real time mode to display torque transients, and peak down mode to capture critical
first peak value. Standard 3/8" drive is good for checking torque wrenches but not impact wrenches. All digital torque testers are ..Readmore..
 
 
Copyright © 2007. Calibration Laboratory Co.,Ltd. All rights reserved.
Visitor : 1275996